Aluminum Honeycomb Panel Specifications & Customization

Q: What is the standard aluminum honeycomb panel size?

The standard Qitianmei panel size is 1220 × 2440 mm. Project-specific dimensions can also be discussed, with final size, tolerances, packing, transport limits and production feasibility confirmed according to the order.

Q: What is the maximum aluminum honeycomb panel size?

The current general range is approximately 1550 mm maximum width and 5000 mm maximum length. Actual available dimensions depend on the selected panel construction and order requirements.

Q: What honeycomb cell designations are available?

Available core designations include 3×3, 4×4, 5×5 and 6×6 mm. A 2×2 mm option can also be discussed for ceiling applications. Cell geometry and measurement method are confirmed if a detailed engineering definition is required.

Define the complete panel specification—not thickness alone.

An aluminum honeycomb panel specification should consider the application, panel size, Overall Panel Thickness, Face Skin Thickness, Back Skin Thickness, honeycomb core and surface finish together.

Qitianmei provides confirmed specification ranges as a starting point. Final dimensions, combinations, tolerances and production details are confirmed according to the complete order specification.

View Aluminum Honeycomb Panels

Qitianmei Aluminum Honeycomb Panel Specification Range

Specification	Qitianmei Range
Overall Panel Thickness	Approx. 5–65 mm
Face Skin Thickness	0.1–2.0 mm
Back Skin Thickness	0.1–2.0 mm
Standard Panel Size	1220 × 2440 mm
Maximum Width	Approx. 1550 mm
Maximum Length	Approx. 5000 mm
Honeycomb Foil Thickness	Approx. 0.03 mm
Honeycomb Cell Designations	3×3 / 4×4 / 5×5 / 6×6 mm
Ceiling Application Option	2×2 mm can also be discussed

Final dimensions, thickness combinations, tolerances, core construction and production feasibility are confirmed according to the complete order specification.

Panel Size and Dimensions

Standard Panel Size

The standard panel size is:

1220 × 2440 mm

1220 × 2440 mm is Qitianmei’s standard full-sheet size.

Maximum Panel Dimensions

Qitianmei’s current general production range is approximately:

Maximum width: 1550 mm
Maximum length: 5000 mm

The actual available size depends on the selected panel construction and order requirements.

Project-Specific Dimensions

Custom dimensions can be discussed. Final size, tolerances, packing, transport limits and production feasibility are confirmed according to the order.

Overall Panel Thickness

Qitianmei aluminum honeycomb panels are available in an overall thickness range of approximately:

5–65 mm

Overall Panel Thickness is only one part of the specification.

The appropriate thickness should be considered together with:

Application
Panel dimensions
Face Skin Thickness
Back Skin Thickness
Honeycomb core
Connection or hardware requirements where relevant

For application-specific information:

Explore Furniture & Cabinet Panels Explore Ceiling Panels Explore Interior Wall Panels

Face Skin and Back Skin Thickness

The aluminum skins on the two sides of the panel should be specified separately.

Face Skin Thickness

0.1–2.0 mm

Back Skin Thickness

0.1–2.0 mm

The Face Skin and Back Skin can use different thicknesses depending on the application and selected panel construction.

A published thickness range does not mean every possible Face Skin and Back Skin combination is automatically available. The final combination is confirmed according to the complete panel specification.

View the Aluminum Honeycomb Panel Structure

Honeycomb Core Specification

The aluminum honeycomb core is another important part of the panel specification.

Honeycomb Foil Thickness

Approx. 0.03 mm

Honeycomb Cell Designations

Available designations include:

3×3 / 4×4 / 5×5 / 6×6 mm

For ceiling applications, a 2×2 mm option can also be discussed.

Cell designation geometry and measurement method are confirmed when required for detailed engineering specifications or drawings.

The designations should not be automatically interpreted as hexagon side length, cell diameter, across-flats dimension or another geometric measurement unless specifically confirmed.

Surface Finish Selection

Surface finish should be specified together with the panel construction.

When preparing your requirement, provide the following where applicable:

Finish system
Color or reference
Visible side or sides
Texture
Gloss level
Approved physical sample where required

Face and Back surfaces can use matching or different finishes depending on the project.

Final color, texture and gloss are confirmed against the approved physical sample and order requirements.

Explore Surface Finishes

How to Build Your Panel Specification

A complete panel enquiry can be built step by step:

Application
Panel Size
Overall Panel Thickness
Face Skin Thickness
Back Skin Thickness
Honeycomb Core
Surface Finish
Quantity + Destination

You do not need to finalize every technical detail before contacting us. Start with the information you already have, and the remaining specification can be reviewed according to the application.

Read How to Specify an Aluminum Honeycomb Panel Request a Quote

What Is Confirmed With the Order?

Qitianmei publishes confirmed general specification ranges to help buyers prepare an enquiry.

Published Qitianmei Specification Range

The website provides general information for:

Overall Panel Thickness
Face Skin Thickness
Back Skin Thickness
Standard panel size
Maximum width and length
Honeycomb foil thickness
Honeycomb Cell Designations
Surface finish options

Confirmed for Each Order

The following are reviewed according to the complete project requirement:

Exact Face Skin and Back Skin combination
Exact panel dimensions
Dimensional tolerances
Honeycomb core construction
Actual core height
Cell geometry where an engineering definition is required
Mixed specifications
Mixed colors or surface finishes
Packing requirements
Fabrication scope
Production feasibility

This helps ensure the quoted panel matches the actual application rather than relying on a generic specification combination.

Made-to-Order Supply, MOQ and Mixed Specifications

Qitianmei primarily produces aluminum honeycomb panels according to confirmed order specifications.

Typical MOQ

The typical MOQ is approximately:

300 m²

Special projects below this quantity can be discussed, subject to confirmation.

Mixed Specifications, Colors and Finishes

Mixed specifications, colors or surface finishes can be discussed.

The minimum quantity for each individual specification, color or finish, and its effect on the total MOQ, are reviewed according to the order and production arrangement.

Different panel constructions should not be assumed to be freely combinable within a 300 m² order without confirmation.

Frequently Asked Specification Questions

What is the standard aluminum honeycomb panel size?

The standard Qitianmei panel size is 1220 × 2440 mm.

Project-specific dimensions can also be discussed, with final size, tolerances, packing, transport limits and production feasibility confirmed according to the order.

What is the maximum aluminum honeycomb panel size?

The current general range is approximately 1550 mm maximum width and 5000 mm maximum length.

Actual available dimensions depend on the selected panel construction and order requirements.

What overall panel thicknesses are available?

Qitianmei’s current overall panel thickness range is approximately 5–65 mm.

The final thickness should be selected together with the panel size, Face Skin, Back Skin, core and intended application.

Can the Face Skin and Back Skin use different thicknesses?

Yes.

Face Skin Thickness and Back Skin Thickness can be specified separately, within the current general range of 0.1–2.0 mm for each side.

The final combination is confirmed according to the complete order specification.

What honeycomb cell designations are available?

Available core designations include 3×3, 4×4, 5×5 and 6×6 mm.

A 2×2 mm option can also be discussed for ceiling applications.

Cell geometry and measurement method are confirmed if a detailed engineering definition is required.

Can I mix different panel specifications in one order?

Mixed specifications can be discussed.

The minimum quantity for each specification and the production arrangement are reviewed according to the order. Different specifications should not be assumed to be freely combinable within the typical 300 m² MOQ.

What information should I provide for a quotation?

Please provide as much of the following information as possible:

Application
Panel Size
Overall Panel Thickness
Face Skin Thickness
Back Skin Thickness
Honeycomb Core requirement
Surface Finish
Quantity
Delivery Destination

If some details are not yet decided, send the information you already have and the remaining specification can be discussed.

View All FAQs

Quick Specification Answers

What sizes are available?

Standard size: 1220 × 2440 mm
Maximum width: approx. 1550 mm
Maximum length: approx. 5000 mm

Project-specific dimensions can be discussed and are confirmed according to the order.

What thicknesses are available?

Overall Panel Thickness: approx. 5–65 mm
Face Skin Thickness: 0.1–2.0 mm
Back Skin Thickness: 0.1–2.0 mm

Face Skin and Back Skin can use different thicknesses, subject to confirmation of the complete panel construction.

Can aluminum honeycomb panel specifications be customized?

Yes. Panel dimensions, thicknesses, Face Skin, Back Skin, honeycomb core and surface finish can be discussed according to the application.

Final combinations, tolerances, production feasibility and mixed-order quantities are confirmed with the order.

Ready to Define Your Panel Specification?

Send us your:

Application → Panel Size → Overall Panel Thickness → Face Skin Thickness → Back Skin Thickness → Honeycomb Core → Surface Finish → Quantity + Destination

We will review the complete requirement and confirm the available panel construction and supply scope.

Request a Quote Request Samples